Need help?Do you have a question about the Phoenix Contact FL SWITCH 2205 and is the answer not in the manual?
General| Number of Ports | 5 |
|---|---|
| Switching Capacity | 1 Gbit/s |
| Power Supply | 24 V DC |
| Mounting Type | DIN Rail |
| Protection | IP20 |
| Port Type | RJ45 |
| Technology | Ethernet |
Details the different available versions of the FL SWITCH 2000 series, including port configurations and types.
Explains the meaning of various status LEDs on the device for monitoring operational status and diagnostics.
Provides step-by-step instructions for securely mounting and removing the device from a DIN rail.
Details the procedure for connecting the 24 V DC supply voltage, including redundant power supply options.
Describes the initial configuration and default parameters of the switch upon delivery or after a factory reset.
Explains how to assign IP addresses using the BootP protocol for network configuration.
Overview of the available functions and information accessible through the web-based management interface.
Details how to view the current operational status, including serial number, firmware version, and system uptime.
Covers the essential network settings such as IP address assignment, subnet mask, and default gateway.
Explains how to individually configure port settings like status, name, speed, and duplex mode.
Describes the setup and management of DHCP services, including relay agent and server functionalities.
Guides on how to establish a connection to the device's CLI using Telnet or SSH.
Explains the fundamental structure, syntax, and parameters for executing CLI commands effectively.
Provides detailed technical specifications for the FL SWITCH 2000 series devices.
Lists available products, their order designations, order numbers, and package quantities.
To Next Page
