Need help?Do you have a question about the Phoenix Contact FL SWITCH 2000 Series and is the answer not in the manual?
General| Product Series | FL SWITCH 2000 |
|---|---|
| Data Rate | 10/100 Mbps |
| Type | Unmanaged |
| Ports | 5 ports |
| Port Type | RJ45 |
| Power Supply | 24 V DC |
| Mounting Type | DIN Rail |
| Standards | IEEE 802.3, IEEE 802.3u |
Explains symbols and signal words used for hazard identification.
Defines the required expertise for operating the devices safely.
Warns against unauthorized hardware/firmware modifications and their risks.
Details risks of unauthorized network access and protective measures.
Details different device versions, copper and fiberglass ports.
Provides a comparative table of functions across different device series.
Explains the meaning of various LEDs and status indicators on the devices.
Describes integrated fiberglass transceivers and flexible combo ports.
Explains how to use SFP slots and optionally configure devices via SD card.
Covers functional grounding and Ethernet connector pin assignments.
Details device dimensions, elements, mounting, and installation for specific series.
Covers device dimensions, elements, mounting, and installation for 20xxF models.
Details device dimensions, elements, mounting, and installation for 24xx/25xx models.
Details device dimensions, elements, mounting, and installation for 26xx/27xx models.
Explains the initial IP settings and delivery state configuration of devices.
Describes how to use Smart Mode to change operating modes and settings.
Details methods for assigning IP addresses using BootP and related tools.
Detailed technical specifications for various FL SWITCH 20xx models.
Detailed technical specifications for various FL SWITCH 22xx models.
Detailed technical specifications for FL SWITCH 24xx and 25xx series.
Detailed technical specifications for FL SWITCH 26xx and 27xx series.
Detailed technical specifications for FL NAT series devices.
To Next Page