Need help?Do you have a question about the Phoenix Contact FL SWITCH 2206-2FX ST and is the answer not in the manual?
General| Number of Ports | 6 |
|---|---|
| Fiber Ports | 2 |
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Mounting Type | DIN Rail |
| Product Type | Managed Switch |
| Operating Temperature | -40°C to 70°C |
Identifies the intended audience of the manual.
Defines safety symbols and warning levels like DANGER, WARNING, CAUTION.
Provides contact details for support and feedback.
Outlines the terms of use for the provided documentation.
Emphasizes that installation must be performed by authorized experts.
Details the various models and their specifications within the FL SWITCH 2000 series.
Specifies the physical size and measurements of the switch.
Identifies and describes the key physical components of the switch.
Explains the meaning of the LEDs for monitoring device status.
Instructions for attaching and detaching the switch from a DIN rail.
Covers connecting power supply and other installation steps.
Details the procedure for connecting the DC power supply to the switch.
Explains the importance and method for grounding the device for safety.
Introduces the concept and use of SFP slots for fiber optic modules.
Describes the default configuration upon initial delivery or after a system reset.
Explains how to configure the switch's operating mode using the Smart Mode feature.
Details the process for assigning IP addresses using the BootP protocol.
Explains the switch's packet forwarding mechanism.
Describes the switch's ability to learn and manage multiple MAC addresses.
Lists prerequisites for accessing and using the WBM interface.
Outlines the main sections and capabilities available within the WBM.
Covers settings related to system, firmware, and device identification.
Details how to configure IP addresses, subnet masks, and gateways.
Explains how to individually configure each network port's settings.
Guides on setting up and managing Virtual Local Area Networks.
Covers configuration of redundancy protocols like RSTP.
Details the setup and operation of the DHCP server and relay agent.
Introduces the CLI for switch configuration and diagnostics.
Explains the methods for connecting to the switch's CLI.
Covers rules for command structure, parameters, and syntax.
Overview of SNMP's role in network monitoring and management.
Details the SNMP agents and MIBs supported by the switch.
Introduces LLDP for network topology discovery.
Details settings for managing multicast traffic flow.
Guides on setting up VLANs for network segmentation.
Specifications for the FL SWITCH 2000 series devices.
Specifications for the FL SWITCH 2100 series devices.
Specifications for the FL SWITCH 2200 series devices.
Specifications for the FL SWITCH 2300 series devices.
Information on order numbers, designations, and quantities.
An index of all figures present in the manual.
To Next Page
