Figure 7: Enable the output to be remote controlled via SMS
Step 3
Send a text message to the phone number associated with the SIM and verify the output has turned on.
Texting Syntax:
Turn Output 1 ON
• #1234:SET:OUTPUT
o 1234 refers to the SMS password set in step 1
Turn Output 1 OFF
• #1234:CLR:OUTPUT
Figure 8: Send text message to TC Router to turn on the output
***Refer to the Appendix for alternative texting commands.***
Congratulations you have successfully configured the TC
Router to receive a text message and activate the output!
To Next Page
Loading...
Need help?
General
