EasyManua.ls Logo

Phoenix Gold MX 800.5 - MX 600.4 Amplifier Details; Specifications and Technical Data; MX 800.1 Amplifier Details

Phoenix Gold MX 800.5
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Amplifier Owner’s Manual
© 2019 Phoenix Gold • www.phoenixgold.com © 2019 Phoenix Gold • www.phoenixgold.com
Amplifier Owner’s Manual
SPECIFICATIONS
IMPORTANT: A power birth certicate is included for each amplier. MX ampliers are
conservatively rated and will exceed their RMS power rating shown here.
All RMS power ratings and measurements are at 14.4 volts with no more than 1% THD.
Hope you enjoy reading he manual as much as I did writing it. Go Big or Go Home. JC
MX 600.4 SPECIFICATIONS
RMS Power Ratings listed at less than 1% THD @ 14.4v
Number of Channels: 4
4Ω: CH 1-4 100W x 4
2Ω: CH 1-4 150w x 4
4Ω: Brg 200w x 2
Total RMS Power
(Sum of rated power):
600W
Bridgeable: Yes
Crossover Control, Linkwitz-Riley: FLAT/HP/LP
40Hz - 500Hz @ 12dB/Oct
Input Selection: 207mV-5.2v
Signal to Noise (@ CEA Standard): 80dB
Frequency Response: Full Range 10-40k
Topology Class D
Heatsink Type: Extruded Aluminum
Cooling Type: Radiation
Operating Voltage: 8V to 16V
Switchable Auto-Turn On: No
Power Supply Type: Unregulated
Power Terminal: 4 Gauge
Speaker Terminal: 10 Gauge
Recommended Fusing: 2 x 30A
Dimensions (L x W x H): 10.16” x 5.91” x 1.91”
258mm x 150mm x 48.5mm
5.91in / 150mm
10.16in / 258mm
1.91in / 48.5mm
5.91in / 150mm
IMPORTANT: A power birth certicate is included for each amplier. MX ampliers are
conservatively rated and will exceed their RMS power rating shown here. All RMS power
ratings and measurements are at 14.4 volts with no more than 1% THD.
SPECIFICATIONS
MX 800.1 SPECIFICATIONS
RMS Power Ratings listed at less than 1% THD @ 14.4v
Number of Channels: 1
1Ω: CH 1 800W x 1
2Ω: CH 1 520W x 1
4Ω: CH 1 350W x 1
Total RMS Power
(Sum of rated power):
800W
Bridgeable: N/A
Crossover Control, Linkwitz-Riley: LP
50Hz - 250Hz @ 12dB/Oct
Input Selection: 207mV-5.2v
Signal to Noise (@ CEA Standard): 90dB
Frequency Response: Sub 15-250Hz
Topology Class D
Heatsink Type: Extruded Aluminum
Cooling Type: Radiation
Operating Voltage: 8V to 16V
Switchable Auto-Turn On: No
Power Supply Type: Unregulated
Power Terminal: 4 Gauge
Speaker Terminal: 10 Gauge
Recommended Fusing: 3 x 30A
Dimensions (L x W x H): 10.16” x 5.91” x 1.91”
258mm x 150mm x 48.5mm
5.91in / 150mm
10.16in / 258mm
1.91in / 48.5mm
5.91in / 150mm
Remote Bass Controller:
Flush mount level controller. Fine tune your bass output with a simple turn of
the precision controller. 16ft of cable included.
Remote Bass Controller:
Flush mount level controller. Fine tune your bass output with a simple turn of
the precision controller. 16ft of cable included.

Related product manuals