Phoenix Model BULLDOG - User Manual

BULLDOG
Wingspan : 1410 mm (55.5in)
Length : 1450 mm (57.1in)
Weight : 4900gr - 5600gr
Radio : 6-9 Channel/ 7 servo high torque, 1standard
Engine : 1.20/ 2 stroke
1.80/ 4 stroke
Instruction Manual

Summary

Kit Contents

Air Frame Assemblies

Lists and describes components of the aircraft's main structure.

Main Gear Assembly

Details parts included for the main landing gear assembly.

Tail Gear Assembly

Lists components for the rear landing gear assembly.

Elevator Control System

Components for the elevator control system.

Rudder Control System

Components for the rudder control system.

Aileron Control System

Components for the aileron control system.

Motor Mount Assembly

Parts required for mounting the aircraft engine.

Fuel Tank

Components related to the aircraft's fuel tank.

Miscellaneous Items

Includes various small hardware and accessory parts.

Installing the Aileron Servo and Linkages (Low Wing)

Installing the Aileron Servo and Linkages (High Wing)

Installing the Horizontal Stabilizer

Installing the Vertical Stabilizer

Installing the Tail Gear

Installing the Landing Gear

Installing the Elevator Servo

Installing the Rudder Servo

Installing the Fuel Tank and Engine

Installing the Throttle Servo

Installing the Cowl

Installing the Switch

Installing the Wing Strut

Balancing

Center of Gravity (CG)

Defines the critical center of gravity point for flight stability.

Lateral Balance

Ensures even weight distribution for stable flight tracking.

Control Throws

Flight Preparation Pre-flight Check

Phoenix Model BULLDOG Specifications

General

Brand	Phoenix Model
Model	BULLDOG
Category	Toy
Language	English