Phomemo M04S - App Connection Method; Method 1: Bluetooth Connection; Method 2: QR Code Connection

封面（84mm）
封面（74.25mm）
297mm
保证“英文”封面在最前面
A3
04. App connection method
P homerno
Note:
1. For your first use, please charge the
printer fully. Press and hold the Power
Button for around 3 seconds to start the
printer.
2. Connecting to the Printer.
Method 1:
Turn on your phone' s Bluetooth and
open your Phomeno App. Press the
button on the top right of your Phomeno
App home page and select M04Sfrom
the list.
Method 2:
Double-press the printer' s power button
to print a QR code. Open your Phomeno
App and press the button on the top right
of your Phomeno App home page. On the
selection page, press scan and scan the
QR code to connect to the printer.
Android system needs to enable positioning and allow app to obtain relevant permissions.
05. How to replace the printing paper
1. Open the top cover and take out
printing paper.
2. Remove the adjuster on
the right side
3. Load the printing paper 4. Install the adjuster on the
right side
5. Put the printing paper into the paper
compartment of the machine and close
the top cover.
*Tips: How to differentiate the sides of the thermal paper?
O Scratch both sides of the thermal paper with fingernail. The side that changes
in color should be installed facing upward.
@ Ensure the smoother side is facing upward.