Phonak Roger Pen Quick Start Guide

How to Perform a Hearing Aid Listening Check Using an Advanced Bionics Cochlear Implant
1. Pair a Roger system receiver with your Advanced Bionics cochlear implant processor.
a. If you are using the Naida sound processor, you can do this by pairing a Roger X
receiver to the base of your Phonak Compilot.
b. For any Advanced Bionics sound processor (including Harmony and Neptune), you
have the option of using a Roger MyLink receiver. Change to your telecoil or microphone
+ telecoil program. Put the neckloop around your neck. Switch the Roger MyLink to the
“on” position.
2. Pair your receiver to a Phonak Roger Pen. Hold the Roger Pen close to the receiver, then
press the “connect” button until you hear a beep. After you hear the beep, your Roger Pen and
receiver are paired.

Phonak Roger Pen Specifications

General

Type	Wireless Microphone
Water Resistance	No
Connectivity	Bluetooth
Battery Life	Up to 7 hours
Charging Time	3 hours
Compatibility	Compatible with Roger receivers and hearing aids
Usage	Speech enhancement in noisy environments
Range	Up to 20 meters
Microphone Type	Directional