Phonak Sky M Series User Manual

24 25
Status hearing aid Indicator light pattern
c
Hearing aid is powered on Repeating single
blink
c
Hearing aid is powered on
and Roger is accessible
Repeating double
blink
c
Low battery * Continuous blink
c
Volume level change (either
initiated by a remote control
or by the multi-function
button)
Single blink per
volume change
c
Program change (either
initiated by a remote control
or by the multi-function
button)
Single blink per
program change
* Low battery alert is initiated approx. 60 minutes before the battery
needs to be charged.
9. On/O
Switch on hearing aid
The hearing aid is congured to
switch on automatically when
removed from the charger
connected to the power supply.
If this function is not congured or
if the charger is not connected to the power supply, rmly
press and hold the lower part of the button for 3 seconds
until the indicator light blinks green. The solid green light
indicates for 3 seconds that the hearing aid is ready.
Switch o hearing aid
Press and hold the lower part of the button for 3 seconds
until the solid red light indicates the hearing aid is o.
Blinking green Hearing aid is switching on
Solid red for 3 seconds Hearing aid is switching o
When you switch on the hearing aid you might hear a
start-up melody.

Phonak Sky M Series Specifications

General

Model	Sky M Series
Connectivity	Bluetooth
Water Resistance	IP68
Made for iPhone	Yes
Made for Android	Yes
Feedback Cancellation	Yes
Wind Noise Reduction	Yes
Directional Microphones	Yes
Battery Type	Zinc-air
Battery Size	Size 13, 312
Telecoil	Yes
Direct Streaming	Yes
Wireless	Yes
Tinnitus Masker	Yes
Noise Reduction	Yes
Tinnitus Manager	Yes
Compatibility	Compatible with Phonak accessories
Weight	Varies depending on the model
Receiver Style	Receiver-in-the-ear (RITE)