Phonak Sky M Series User Manual

8 9
1. Quick guide
Left & right hearing aid markings
Charging your hearing aid
Blue marking for
left hearing aid.
Red marking for
right hearing aid.
After placing your hearing aid
in the charger, the indicator light
will show the charging state of
the battery until the hearing aid
is fully charged. When fully
charged the indicator light will
be constantly on, i.e. solid
green light.
Multi-function button with indicator light
The button has several functions.
It functions as an on/o switch, a
volume control and/or a program
change depending on the hearing aid
programming. This is indicated in
your individual instructions. If paired
with a Bluetooth®-enabled phone,
a short press will accept and a long
press will reject an incoming call.
On/O
Firmly press the lower part of the
button for 3 seconds until the indicator
light turns solid green (On) or solid
red (O).
Enter ight mode
When device is o, press the lower part
of the button for 7 seconds until the
solid orange light appears. Then release
the button.
Before using your hearing aid for the rst time, it is
recommended to charge it for 3 hours.

Phonak Sky M Series Specifications

General

Model	Sky M Series
Connectivity	Bluetooth
Water Resistance	IP68
Made for iPhone	Yes
Made for Android	Yes
Feedback Cancellation	Yes
Wind Noise Reduction	Yes
Directional Microphones	Yes
Battery Type	Zinc-air
Battery Size	Size 13, 312
Telecoil	Yes
Direct Streaming	Yes
Wireless	Yes
Tinnitus Masker	Yes
Noise Reduction	Yes
Tinnitus Manager	Yes
Compatibility	Compatible with Phonak accessories
Weight	Varies depending on the model
Receiver Style	Receiver-in-the-ear (RITE)