Phonak Sky M Series User Manual

16 17
3.
Remove the hearing aid from the
charger by
1. pulling the hearing aid gently
toward yourself and
2. lifting it out of the charger.
2
1
Do not hold the tube to remove the hearing aid from
the charger as this can damage the tube.
When the charger is connected to the power supply,
the hearing aid switches on automatically when removed
from the charger. The indicator light starts blinking.
The solid green light indicates for 3 seconds that the
hearing aid is ready.
If you unplug the charger while the hearing aid is
charging inside, please make sure to turn o the hearing
aid to prevent discharge.
Turn o your hearing aid before inserting it in the
disconnected charger to store it.
5. Left & right hearing aid markings
There is a red or blue marking on the back of the hearing
aid and on the speaker. This will tell you if it is a left or a
right hearing aid.
Blue marking
for left hearing aid.
Red marking
for right hearing aid.

Phonak Sky M Series Specifications

General

Model	Sky M Series
Connectivity	Bluetooth
Water Resistance	IP68
Made for iPhone	Yes
Made for Android	Yes
Feedback Cancellation	Yes
Wind Noise Reduction	Yes
Directional Microphones	Yes
Battery Type	Zinc-air
Battery Size	Size 13, 312
Telecoil	Yes
Direct Streaming	Yes
Wireless	Yes
Tinnitus Masker	Yes
Noise Reduction	Yes
Tinnitus Manager	Yes
Compatibility	Compatible with Phonak accessories
Weight	Varies depending on the model
Receiver Style	Receiver-in-the-ear (RITE)