36 37
14. Rebooting your hearing aid
Use this technique if your hearing aid is in an error state.
This will not remove or delete any program or settings.
1.
Press the lower part of the button for at least
15 seconds. It does not matter if the hearing aid is
switched on or o before you start pressing the button.
There is no light or acoustic notication at the end of the
15 seconds.
2.
Place the hearing aid in the power-connected charger and
wait until the indicator light blinks green. This can take up
to 30 seconds. The hearing aid is now ready to use.
15. Operating conditions
The product is designed such that it functions without
problems or restrictions if used as intended, unless
otherwise noted in this user guide.
Please ensure to charge the hearing aid within operating
temperature range: +5° to +40° Celsius (41° to 104°
Fahrenheit), atmospheric pressure range: 800 hPa to
1060 hPa and humidity 0% to 85% (non condensing).
Sky M-PR is classied IP68 (depth of 1 meter for
60 minutes) and designed to be used in all daily life
situations. Therefore you do not have to worry about
exposing the hearing aids to rain shower or sweat.
However, Sky M-PR is not intended to be used in water
activities that includes chlorinated water, soap, salt water
or other liquids with a chemical content.
To Next Page
Loading...
Need help?
General
