Phonetics Sensaphone 800 - The Unit ID Number

3. Press the corresponding Zone number key.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWE
R
1
CALL
DELAY
2
VOICE
REPS
The 800 will play back your recorded message.
To erase a Zone or ID message:
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press the MESSAGE key.
MESSAGE
The 800 will say “Enter message number.”
3. Press the Zone Number or ID key.
0
ID NUMBER
POWER
The 800 will say, “Message erased.”
4.2 The Unit ID Number
The Unit ID Number is the identification number of the Model
800. This number is typically the telephone number where the
unit is installed, or it may be designated using any number that
best suits your application.
The purpose of the Unit ID Number is to immediately provide the
source of any alarm, especially when using multiple Model 800
Sensaphone
®
Model 800 User’s Manual
43