Phonetics Sensaphone 800 - Interrogating High Sound Alarm Recognition Time; High Sound Alarm Enable;Disable

3. Press SOUND. The Model 800 responds: “Enter seconds.”
9
LISTEN TIME
SOUND
4. Using the number keys, enter the number of seconds. The
Model 800 will recite the digits as they are pressed.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWE
R
1
CALL
DELAY
2
VOICE
REPS
5. Press ENTER.
ENTER
PM
5.10.4 Interrogating High Sound Alarm Recognition Time
The Recognition Time for sound alarm monitoring ranges from 5
seconds to 60 seconds. The default value is 8 seconds.
1. Press SET.
WHAT
IS
2. Press RECOGNITION TIME.
7
RECOGNITION
TIME
3. Press SOUND. The Model 800 responds: “Enter seconds.”
9
LISTEN TIME
SOUND
5.11 High Sound Alarm Enable/Disable
The Model 800 monitors sound through the built-in microphone.
When the sound level suddenly exceeds the programmed high
sound limit, the Model 800 will respond with an alert condition.
The increased sound level must continue throughout the
programmed recognition time. The default for high sound alarm is
enabled (on).
Sensaphone
®
Model 800 User’s Manual
83