Phonetics Sensaphone 800 - Rings until Answer; Programming Rings until Answer

Voice Prompted Paging Systems
If your paging provider is answered by a voice prompt which
requires you to enter one or more touch-tones to send a message,
then use the wait-for-answer code (4.5.1) in combination with
the Pause key and other number keys to navigate the voice menu
until you reach the message entry point. The Sensaphone will
automatically send it’s telephone number, Zone numbers, and a
pound (#) tone at the end of the number. For assistance contact
Sensaphone Technical Support at 1(877)373-2700.
4.6 Rings Until Answer
Rings Until Answer is the programmed number of times the
telephone rings before the Model 800 will answer an incoming
call. This can be set from 1 to 15 rings. The default value is 4.
4.6.1 Programming Rings Until Answer
To program Rings Until Answer:
1. Press SET.
SET
2. Press RINGS/TAD. The Model 800 will respond: “Enter
number.”
RINGS
TA
D
*
3. Using the number keys, enter a value.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWE
R
1
CALL
DELAY
2
VOICE
REPS
4. Press ENTER. The Model 800 will respond: “Enter.”
ENTER
PM
Sensaphone
®
Model 800 User’s Manual
53