Phonetics Sensaphone 800 - Programming the ID Number; Interrogating the ID Number

units in a complex monitoring system. When the Model 800 is
called from a remote location, it always begins its message with
the identification number:
“Hello, this is (Unit ID Number).”
4.2.1 Programming the ID Number
To program the ID Number:
1. Press SET.
SET
2. Press ID NUMBER.
0
ID NUMBER
POWE
R
3. Using the number keys, enter up to 16 digits for the ID
number. The Model 800 will recite the digits as they are
pressed.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWE
R
1
CALL
DELAY
2
VOICE
REPS
4. Press ENTER. The Model 800 will respond: “Enter.”
ENTER
PM
4.2.2 Interrogating the ID Number
To interrogate the ID numbers:
1. Press WHAT IS.
WHAT
IS
2. Press ID NUMBER. The Model 800 will recite the Unit ID
Number programmed.
0
ID NUMBER
POWER
Chapter 4: Communications Programming
44