Phonetics Sensaphone 800 - Page 98

Sensaphone
®
Model 800 User’s Manual
95
Control the Relay Output
The following commands will allow you to check the status
of the relay output and to toggle the Relay Output On and
Off.
Description Touch-Tone Command
Reciting the Output Status W(9) + R(7) + O(6)
Description Touch-Tone Command
Switching the Output S(7) + R(7) + O(6)
Activate Microphone Listen-in
The following command will allow you to activate the
microphone listen-in for the programmed duration.
Description Touch-Tone Command
Activate Mic Listen-in M(6) + I(4) + C(2)
Request Status Report
The following command will initiate a status report.
Description Touch-Tone Command
Recite status report W(9) + S(7) + R(7)
Hang-up
The following command will make the 800 hang up the
telephone line.
Description Touch-Tone Command
Hang-up the phone line B(2) + Y(9) + E(3)