Phonic i2600 User Manual

4
i2600
English
Menu Navigation
Menu navigation on the i2600 is quite simple. Use the NAV/PM1 encoder to scroll through the different menu options. The ENTER button
is used to conrm. Use the PM2 and PM3 encoders to adjust settings and values as necessary. In certain menus, the PM3 encoder is
used for ne adjustment of parameters, whereas in others it may be used for further adjustments independent of PM2. Again, the ENTER
button is used to conrm these settings. The ESC button can be used at any time to cancel any adjustments made as long as they haven’t
been conrmed.
Utility Menu
By pushing the Utility button users can gain access to a number of system, program and security settings.
NAV/PM1 Encoder PM2 or PM3 Encoder
[to navigate between menus] [to chose option, then ENTER to load it;
(*) indicates the selected option]
1 UTILITY MENU:......
<< System Utilities >>
1.1 SYSTEM UTILITY: Input Mode Setup
<< Input Mode Setup >> Setup: Stereo *
Setup: Dual Mono
1.2 SYSTEM UTILITY: Power-On Procedure
<< Power-On Procedure >> Fade-In: On *
Fade-In: Off
1.3 SYSTEM UTILITY: Delay Units
<< Delay Units >> Unit: Time(ms) *
Unit: Distance (m)
1.4 SYSTEM UTILITY: Software Version
<< Software Version >> Version: V1.00
2 UTILITY MENU:......
<< Program Utilities >>
2.1 PROGRAM UTILITY: Recall a Program
<< Recall a Program >> 01: Preset 01
: :
50: Preset 50
2.2 PROGRAM UTILITY: Save a Program
<< Save a Program >> 01: Preset 01
: :
50: Preset 50
2.3 PROGRAM UTILITY: Delete a Program
<< Delete a Program >> 01: Preset 01
: :
50: Preset 50
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER

Phonic i2600 Specifications

General

Brand	Phonic
Model	i2600
Category	Recording Equipment
Language	English