Need help?Do you have a question about the Phonic MICRO VI and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Type | Digital Recorder |
| Mic Inputs | 2 x XLR / 1/4" Combo |
| Recording Format | WAV (16-bit/44.1kHz) |
| Microphone | No |
| Inputs | 2 XLR/TRS combo inputs |
| Outputs | 1 x 1/8" stereo line out, 1 x 1/8" headphone |
| Storage | SD/SDHC card (up to 32GB) |
| Battery | 2 AA batteries or USB power |
Advises against exposing the unit to rain, moisture, or heat sources and specifies cleaning methods.
Warns against removing covers and emphasizes referring servicing to qualified personnel.
Instructs users to notify dealers and shipping companies immediately if the unit is damaged.
Describes the bi-color LEDs for left and right channel signal and peak level detection.
Explains the knob for setting the input signal level to the unit.
Details the control for balancing the original and effect-processed signals.
Describes the control for selecting one of the 16 available effect programs.
Explains the knob for setting the signal level sent to the amplifier or mixer.
Indicates the red LED that illuminates when the adapter is plugged in.
Explains how to secure the power cable using the cord cinch feature.
Details the AC input socket for power and the THRU socket for daisy-chaining.
Describes the 1/4" jack for connecting a footswitch to control effects.
Identifies the two 1/4" mono jacks for connecting to mixing consoles.
Details the pair of 1/4" mono jacks for connecting audio sources.
Instructions on using the RT-3 rack tray to mount one to three MICRO series units into a 19" rack.
Lists technical details including frequency response, dynamic range, AD/DA, levels, noise, THD, and I/O.
Enumerates the 16 effect programs available on the MICRO VI.
Lists the controls available on the front panel of the unit.
Details the types and quantities of jacks found on the rear panel.
Provides the physical dimensions (WxHxD) and net weight of the unit.
To Next Page
