Need help?Do you have a question about the Phonic i7600 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Type | Graphic Equalizer |
| Input Impedance | 20 kΩ |
| Weight | 4.5 kg |
| Frequency Response | 20Hz - 20kHz |
| S/N Ratio | > 96 dB |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | > 96 dB |
| Power Supply | 100-240 VAC, 50/60 Hz |
Covers points 1-14 regarding safe operation, cleaning, ventilation, and power cord handling.
Details electrical shock risks, opening the unit, and exposure to rain or moisture.
Explains the front panel controls, displays, and modes for EQ and RTA modules.
Details messages shown in the alphanumeric display indicating signal clipping.
Describes how to edit single bands, multiband groups, and adjust gain/cut levels.
Details programs, low-pass/high-pass filters, gain, and channel linking.
Covers band selection, display information, and reference marks for RTA.
Explains range, weighting, measurement units, peak hold, signal source, and pink noise.
EQ settings for presets P1 through P6, detailing band adjustments and parameters.
EQ settings for presets P7 through P12, including band adjustments and parameters.
EQ settings for presets P13 through P18, detailing band adjustments and parameters.
EQ settings for presets P19 through P24, including band adjustments and parameters.
EQ settings for presets P25 through P27, detailing band adjustments and parameters.
EQ settings for presets P28 through P30, including band adjustments and parameters.
Templates for user-defined EQ settings U1 through U3, with fields for description and parameters.
Templates for user-defined EQ settings U4 through U6, with fields for description and parameters.
Templates for user-defined EQ settings U7 through U9, with fields for description and parameters.
Templates for user-defined EQ settings U10 through U12, with fields for description and parameters.
Templates for user-defined EQ settings U13 through U15, with fields for description and parameters.
Templates for user-defined EQ settings U16 through U18, with fields for description and parameters.
Templates for user-defined EQ settings U19 through U21, with fields for description and parameters.
Templates for user-defined EQ settings U22 through U24, with fields for description and parameters.
Templates for user-defined EQ settings U25 through U27, with fields for description and parameters.
Templates for user-defined EQ settings U28 through U30, with fields for description and parameters.
To Next Page
