Phonic i7600 - Technical Specifications

9i7600
English
SPECIFICATIONS
INPUT
Connectors Balanced XLR and 1/4” TRS (combo)
Nominal Operating Level +4 dBu or -10 dBV (determined by a rear panel switch)
Impedance 20k ohms
Maximum Input Level +16 dBu
OUTPUT
Connectors Balanced XLR and 1/4” TRS
Nominal Operating Level +4 dBu or -10 dBV (determined by a rear panel switch)
Impedance 220 ohms
Maximum Output Level +16 dBu
SYSTEM
Frequency Response 20 Hz to 22 kHz, +/- 0.5dB
Dynamic Range 96 dB typical
THD 0.004% typical at +4 dBu, 1 kHz
S/R < -90 dB
Crosstalk < -80 dB, 20 Hz to 22 kHz
FUNTIONS
EQ Module
Dual ISO-standard 30-band, 1/3-octave, 20 Hz to 20 kHz, LPF, HPF,
channel gain
RTA Module Response time, level view range, weighting, peak hold, pink noise
DIGITAL PROCESSING
Converters 32-bit sigma-delta, 64/128-times oversampling
Sampling Frequency 44.1 kHz
PROGRAM MEMORY 30 factory-set programs (read only), 30 user-dened programs (read/write)
FRONT PANEL
Switches EQ/RTA, Bypass
Rotary Controls Graphic Edit, Function Edit
Display Digital alphanumeric LCD
REAR PANEL
Connectors
Input x 2 (XLR and 1/4” TRS combo), Output x 2 (XLR and 1/4 TRS), pink
noise (XLR)
Switches
Input operating level switch (+4 dBu/-10 dBV). Output operating level
switch (+4 dBu/-10 dBV).
POWER REQUIREMENTS
USA/Canada ~120 V AC, 60 Hz
UK/Australia ~240 V AC, 50 Hz
Europa ~230 V AC, 50 Hz
Fuse 100-120 V AC: 1 A, 200-240 V AC: 0.5 A
Power consumption 15 W
Power connector Standard IEC receptacle
PHYSICAL
Dimensions (WxHxD) 483 x 44 x 206 mm (19” x 1.7” x 8.1”)
Weight 2.5 kg (5.5 lbs)