Phonic MX300 XE - Introduction and Features; Introduction; Features; Getting Started

4 MX300 XE
INTRODUCTION
Congratulations on your purchase of the Phonic MX
DJ Mixer series – MX300 XE. In order to get the
best performance of the MX DJ Mixer series, please
read all safety and owner’s manual carefully before
operating the mixer, and keep it in a safe place for
further reference.
FEATURES
4Channel 1-3 on the front panel switchable between
phono, mic or line
4Mic 1 microphone-input via unbalanced XLR-
socket on the front panel
4Mic 2 and 3 microphone-input via 1/4” mono-jack
on the back panel
4Input sensitivity control (gain) for each channel
43-fold, separate tone-control (bass, middle, treble)
for each channel with extremely wide range
4Limited Killfuntion (attenuated to –30dB) and
limited F/X-function (enforced to +15dB) possible.
You can cut the signal almost completely off by
turning the control to the left
4High-quality smooth channel faders
4Super long durable crossfader replaceable from
above
4Crossfader for mixing channels 1, 2,and 3
(crossfader assign button)
42 beat-indicator at the crossfader for perfect
mixing
43 LED-level-displays (master-out L/R and Cue
Level)
4Headphones-connection on the front panel
4Headphone-output adjustable via Cue Level-
control
4Additional Cue Split/Cue Mix-button
4Cue Split function: the Cue-signal is on the one
side of the headphones and the output-signal on
the other side
4Cue Mix function: the adjustable mix of cue-
signal and output signal is on both sides of the
headphones
4Mixing of the headphones-signal possible via cue
mixing-fader
4Output signal adjustable via master-control and
balance-control
4Master-Out, Booth-out, and Rec-Out via 2 RCA-
sockets each
4Rec-Out independent from master-level for
records with static level
4Separately controllable monitor-output (DJ-booth)
for connecting active speaker or an additional
amplier
4High-grade discotheque-mixer with a convincing
sound
GETTING STARTED
1. Before turn on the power, set the Master output
control on each channel all the way off.
2. Always turn the power off before connecting or
disconnecting cables.
3. Check the AC Voltage before connecting the AC
plug.