Need help?Do you have a question about the Phonic SUMMIT and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| MIDI | No |
| EQ | 3-band |
| Outputs | Master, Booth, Record |
| Microphone Input | 2 |
| Effects | Yes |
| USB | Yes |
| Inputs | 4 stereo channels, 2 microphone inputs |
General safety instructions for operating the apparatus, including precautions against water, heat, and proper handling.
Congratulates the user on purchasing the SUMMIT digital mixer and highlights its key features and design.
Lists the key specifications and capabilities of the SUMMIT, including channel count, faders, GUI, and connectivity.
Details the included items with the SUMMIT system and lists optional components available for purchase.
Specifies the ideal operating environment and conditions for the SUMMIT console, including temperature and ventilation.
Guides users through the initial setup process, including power connections and connecting input/output devices.
Describes the various analog input controls, settings, and sections of the SUMMIT console.
Explains the functions of the channel strips, including select, solo, on/off buttons, and faders.
Details the AUX send fader modes and layer mode buttons that control channel strip functionality.
Describes the LCD touch screen, function buttons, and up/down buttons for navigating the SUMMIT interface.
Details the various input and output connectors found on the rear panel of the SUMMIT console.
Provides step-by-step instructions for installing the optional FireWire + USB expansion card into the SUMMIT.
Explains the SUMMIT's start-up process, including the initial display and power-on self-test sequence.
Details how to navigate the SUMMIT's user interface using the touch screen, menus, and onscreen icons.
Describes how to save, load, delete, and reset settings and presets for various functions on the SUMMIT.
Explains how to configure AUX sends and AUX/Group masters, including sending signals to multi-outputs and the main mix.
Details the functions within the Control Room tab, including solo sources, global buttons, and level metering.
Describes the functions related to the Main and Multi outputs, including mono/stereo selection and output assignments.
Explains how to view input channel levels and main stereo mix levels using the meter tab.
Details how to view output levels for AUX, Group mixes, and the main mix using the meter page.
Describes the meter/fader tab for adjusting levels and the multi tab for viewing output signals.
Explains the channel tab fader controls, including select, on/off, solo, pan, and level meters.
Details the fader controls for AUX and Group tabs, including channel select, on/off, solo, pan, and level meters.
Describes the fader controls for the Main tab, including stereo/mono selection and AES/EBU input handling.
Explains how to set processing order for EQ, dynamics, and delay for individual signals using the patch tabs.
Details how to adjust delay time, mix, and feedback for input channels and outputs.
Describes how to select input channels or AUX mixes and apply various effect types available on the SUMMIT.
Explains effect output destination, level meters, on/off controls, dry/wet mix, and specific parameters for effects.
Details the 4-band parametric equalizer, including signal source, EQ on/off, grid/curve display, and band controls.
Explains EQ band types (PEAK, SHELF, CUT) and parameters like Gain, Frequency, and Q, along with EQ in/out level meters.
Describes the built-in Gate, Expander, Compressor, and Limiter functions, including channel selection and on/off controls.
Explains dynamics parameters like Ratio, Threshold, Attack, Release, Output Gain, Range, and gain reduction meters.
Explains how to use the signal generator to send sine waves or pink noise to AUX, group, or main mixes.
Details how to save and select scene settings for channels, AUX, groups, and the main mix.
Describes how to assign names to input channels and multi-outputs using a digital keyboard.
Explains how to select the clock source for AES/EBU input/output, including internal and external options.
Details how to link channel level controls and pair channel parameters for synchronized adjustments.
Guides users on how to calibrate the SUMMIT's touchscreen for accurate input.
Provides instructions for updating the SUMMIT's firmware using an SD card and checking current versions.
Outlines the steps for restoring the SUMMIT's system if startup becomes impossible due to DSP corruption.
Provides answers to common user questions regarding instrument connection, level setting, and monitoring.
Details the software installation procedure for Windows and Mac OSX, including driver installation and device recognition.
Explains how to daisy-chain devices and discusses FireWire/USB compatibility with various operating systems.
Lists common issues users might encounter, such as LCD calibration, power problems, no output, soft sound, distortion, and digital glitches.
Lists and describes various preset configurations for the Gate, Expander, Compressor, and Limiter functions.
Provides a table of preset EQ settings for different instruments and sound types, including parameters for each band.
Details preset configurations for Room, Hall, and Plate reverb effects, including parameters like LPF, HPF, and Level.
Lists preset configurations for the Echo effect, including delay times and feedback gain.
Details preset configurations for Chorus effects, including LFO frequency, phase, type, depth, and delay parameters.
Details preset configurations for Flanger effects, including LFO parameters, depth, and feedback.
Details preset configurations for Phaser effects, including LFO parameters, depth, and stage number.
Details preset configurations for Vibrato effects, including LFO parameters, depth, and frequency.
Provides a detailed table of parameters and their descriptions for Reverb effects (Room, Hall, Plate).
Lists parameters and descriptions for the Echo effect, including time, feedback, and filter settings.
Details parameters and descriptions for the Tap Delay effect, including feedback, LPF, and HPF.
Lists parameters and descriptions for Chorus effects, covering LFO, phase, depth, and delay.
Details parameters and descriptions for Flanger effects, including LFO, phase, depth, and feedback.
Lists parameters and descriptions for Phaser effects, covering LFO, wave, depth, and stage number.
Illustrates a typical live setup, showing how to connect microphones, instruments, and speakers to the SUMMIT.
Information on how to purchase Phonic gear and optional accessories through distributors or directly.
Details Phonic's service center network and advises against self-repair to maintain warranty validity.
Outlines Phonic's warranty coverage, duration, and requirements for claiming warranty service.
Provides contact information and resources for customer service and technical support, including FAQs and driver downloads.
To Next Page
