Phonic POWERPOD620 - Specifications

page 17
PHONIC CORPORATION POWERPOD User's Manual
Powerpod 1060 and 1062 Deluxe Effects
Program Name Program Description
Parameter Controllability
Parameter Variable Range
HALL Ideal for mimicking the acoustics of a Hall Reverb Time 0.3 sec – 10 sec
ROOM Creates acoustics similar to those of a Small Room Reverb Time 0.3 sec – 3.2 sec
PLATE
Simulates a Plate Reverb device, creating hard sound-
ing Reverberation
Reverb Time 0.3 sec – 10.0 sec
VOCAL 1 Ideal for Reverb of vocals Reverb Time 0.3 sec – 10.0 sec
VOCAL 2 Ideal for Reverb of vocals Reverb Time 0.3 sec – 10.0 sec
ECHO 1 Ideal for Echoing vocals Delay Time 0 – 800 ms
ECHO 2 Ideal for Echoing vocals Delay Time 0 – 800 ms
DELAY 1 Delays the audio signal Delay Time 0 – 800 ms
DELAY 2 Delays the audio signal Delay Time 0 – 800 ms
EARLY REF.
Modifi es early refl ections, creating a deeper sound or an
echo-like effect
Room Size 0.1 – 10.0
GATE REVERB Produces effect by cutting the reverberation Room Size 0.1 – 5.0
DOUBLER Creates an effect simulating 2 vocalists Pitch Fine 0 – 50
SYMPHONIC Adds richly layered depth to the sound Depth 0 – 100%
FLANGE Adds a sense of pitch to the sound
Modulation
Frequency
0.05 – 4.00 Hz
DISTORTION Used to distort the sound Drive 0 – 100%
TAP DELAY
Allows you to select the delay time by clicking a button
twice or by use of a footswitch. The amount of feedback
is adjusted using the PARAMETER control.
Feedback Gain 0 – 99%
Delay Time
100 ms (600 bpm)
– 2690 ms (22.3 bpm)