Need help?Do you have a question about the Phonic POWERPOD620 and is the answer not in the manual?
Details various input types available on Powerpod mixers, including XLR and 1/4" jacks.
Covers tape inputs, record outputs, and other master connection points for the mixer.
Details the connection of speakers to the amplifier outputs, including impedance considerations.
Describes the 1/4" jacks for connecting monitor speakers, specific to the Powerpod 1060 Deluxe.
Explains the power button, AC connector, and voltage selector switch on the rear of the mixer.
Details various controls for adjusting audio signals on individual mixer channels, including EQ and level adjustments.
Shows effect titles and how to select and display them using program control.
Details parameter control for effects and tap delay settings.
Explains peak indicators, effect on/off buttons, and associated LEDs.
Adjusts levels for effects outputs and input signals like AUX and Tape.
Manages graphic equalization, EQ selection, rumble filters, and phantom power.
Covers amplifier selection, monitor, and main output level adjustments.
Displays audio levels for main and monitor outputs to ensure optimal signal strength.
Shows limiter activation and the mixer's power status.
To Next Page
General
