Phonocar 09004 - Page 34

34
09004 - EN
• Alarm memory (see next paragraph for details of operation):
The alarm memory provides indications of the alarms that occurred in the last period of system arming. It is possible to check this
information via the LED on the control panel after the system has been disarmed.
• Emergency disconnection via Pin Code (see next paragraph for details of operation):
If the original remote control is lost or broken, you can disarm the system using the PIN code found on the Pin Code Card.
• Flashing direction indicators during alarm:
When the system detects a break-in, the direction indicators will ash in addition to the sound alarm. The warning will cease when the
system is disarmed or the complete alarm cycle is completed. The direction indicators will also ash when a front door locking fault is
detected when the system is armed.