Phottix Mitros TTL - Technical Specifications

13
Technical Specication
Modes: TTL , Manual, and Multi Stroboscopic
Guide No.: 58/190 (at 105mm focal length, ISO 100 in meters/feet)
Flash coverage: 17-105mm (14mm with wide angle diuser panel)
Auto zoom (Flash coverage automatically adjusts to match the lens focal
length)
Manual zoom (Zoom can be adjusted by changing setting on the ash/cam-
era)
Rotation: 360 degrees, Up-Down: -7 to 90 degrees.
FEC (Flash exposure compensation): Manual
Sync modes: First Curtain Sync, Rear Curtain Sync, and High Speed Sync
Stroboscopic ash: 1-100Hz
Flash exposure conrmation: Blue LED lamp lights up in TTL mode
Flash Recycling (with size-AA alkaline batteries)
Recycling time/Flash-ready indicator:
Normal ash: Approx.0.1-5 sec./Red LED indicator lamp lights up.
Quick ash: Approx.0.1-2.5 sec./Green LED indicator lamp lights up.
Internal power: Four size-AA alkaline batteries or size-AA Ni-MH batteries
External battery: Compatible with Phottix Battery Pack and Nikon High-Per-
formance Battery Pack SD-9 through specic adapter
Power saving: Non-wireless slave modes: 90 seconds, Wireless slave mode: 60
minutes
Wireless ash
Transmission method: Optical pulse
Channels: 4
Wireless options: OFF, Master, Slave and Optical Slave
Transmission range (Approx.): (Indoors:12-16m/39.36-52.48 ft., Outdoors:
7-9m/22.96-29.52 ft)
Reception angle: ±40°(horizontal), ±30°(vertical)
Controlled slave groups: 3 (A, B, and C)
Standby current: ≤100uA in sleep mode
Dimensions: (L x W x H): 202.8×77.5×58.3 mm
Weight (Approx.): 427g (ash only, excluding batteries)
www.phottix.com
En
INSTRUCTION MANUAL