Need help?Do you have a question about the Phottix Mitros and is the answer not in the manual?
Key safety guidelines for using the Phottix Mitros flash to avoid damage or injury.
Identifies and explains the buttons and ports on the back and left side of the flash.
Details the functions of the directional and mode adjustment buttons on the flash.
Identifies and explains the main components on the front and right side of the flash.
Instructions for installing batteries and understanding the battery level indicator.
How to raise, rotate, and use integrated diffusers for light modification.
Steps for attaching the flash to a camera and turning the unit on/off.
Details on the flash's circuit to prevent damage from overheating and how to manage it.
Information on the 3.5mm sync port for triggering and the USB port for firmware upgrades.
Explanation of the different LED lights and their meaning during operation.
Guidance on using an external battery pack with the Phottix Mitros flash.
Detailed breakdown of the information displayed on the flash's LCD screen and its meaning.
Covers auto-save functions, manual/auto flash zoom, and HSS/SCS settings.
Explains power-saving idle modes, modeling flash, and the AF assist light feature.
Details the test button functionality and how flash levels are adjusted.
Explains ETTL mode operation and how to set Flash Exposure Compensation.
Details FEB for multiple exposures and FEL for locking flash exposure.
How to enable and use High Speed Sync mode for faster shutter speeds.
Utilizing SCS for special effects by firing the flash at the end of an exposure.
How to set and use manual flash power levels for controlled lighting.
Programming rapid flash sequences for capturing motion or special effects.
How the flash fires optically when detecting nearby flashes in manual mode.
Configuration for Master and Slave flash modes, channels, and groups.
Details on setting transmission channels and controlling slave flash ratios.
Adjusting EV compensation and flash ratios for ETTL groups A, B, and C.
Setting power levels and ratios for Manual and Multi modes across groups.
Procedure for accessing and modifying the flash's programmable custom functions.
Explanation of available custom functions, their settings, and descriptions.
Details on the quick flash function for faster recycling and auto backlight settings.
Adjusting TTL preferences and restoring the flash to factory default settings.
Key technical details including guide number, flash coverage, sync modes, and power.
Statement confirming the product's compliance with EMC Directive and relevant standards.
Information regarding the device's compliance with FCC rules and operating conditions.
General| Type | Speedlight |
|---|---|
| High-Speed Sync | Yes |
| Swivel Angle | 180° left and right |
| Battery Type/Power Source | 4 x AA batteries |
| TTL Support/Compatibility | Nikon i-TTL |
| Wireless Communication/Functionality/Triggering | Built-in wireless receiver and transmitter |
| Tilt Angle | 90° up, 7° down |
| Weight | 400 g (without batteries) |
| Guide Number | 58 (ISO 100, 200mm) |
| Flash Coverage/Zoom Range | 24-105mm (Full Frame) |
To Next Page
