Physio Control LIFEPAK 15 Service Work Instructions

Title Service Process Work Instruction LIFEPAK 15 V4 CO2 Upgrade Page 1 of 43
Doc Type
Service Process Document
Doc ID
3333964
Doc Rev
B
Doc State
Released
State Date
6/27/2019
Ref. Product DMR:
3313182
Ref. PFMEA:
3333967
Ref. PFMEA Rev:
B
Template: 7000743_B
This document is electronically signed in the Physio-Control, Inc. Product Lifecycle Management (PLM) System. Approvals can be
obtained from the PLM system which displays the selected approvers, their approval roles, and approval dates.
PROPRIETARY AND CONFIDENTIAL DOCUMENT FOR PHYSIO-CONTROL, INC. USE ONLY. This document is property of Physio-
Control and may not be used, reproduced, published or disclosed to others without authorization from Physio-Control.
Owner
Corporate
Attachments (Optional):
Qty
Pages
Page Sequencing
Change Description
Clarify step to set CO2 option to ON in Combined Loader “Configure” Operations section
Add image for LP15 Settings CO2 Option
Add image for step 15.3.3
Added Torque Driver conversion for 2 in-lbs.
Added Warnings and Cautions and General Requirements section
Remove steps that are included in the business process 7000180
Minor typographical edits and process reorder for clarification and alignment with Service Manual and other Process Work Instructions.
Update template to 7000743 Rev B
Refer to redlines for details of change

Physio Control LIFEPAK 15 Specifications

General

Brand	Physio Control
Model	LIFEPAK 15
Category	Medical Equipment
Language	English