For further information, please contact your Physio-Control representative at 800.442.1142 or visit our website at www.physio-control.com
©August 2009 Physio-Control, Inc. Redmond, WA, 98052, USA. All rights reserved. All names herein are trademarks or registered trademarks of their respective owners.
6. To install the new electrode, slide the anchor pin into the slot.
7. Plug the electrode connector into the receptacle.
8. Ensure the new electrode packet is centered on the defibrillator
and tucked behind the lip before closing the lid.
9. Close the lid. Confirm that the packet “Use By” date is visible
through the window in the upper right-hand corner of the lid.
Reference:
LIFEPAK CR Plus and LIFEPAK EXPRESS Defibrillator Operating Instructions, Section 5.3
Applies to:
LIFEPAK CR Plus Defibrillator
LIFEPAK EXPRESS Defibrillator
To Previous Page
Loading...
