Phytec phyCAM User Manual

=
mevqb`=jÉëëíÉÅÜåáâ=dãÄe=
=
«=mevqb`=jÉëëíÉÅÜåáâ=dãÄe=OMOM= = NU=L=NU=
pìééçêí=eçíäáåÉ=bìêçéÉWW=HQV=ESNPNF=VOONJ ●PN==ÜííéWLLïïïKéÜóíÉÅKÇÉ=
pìééçêí=eçíäáåÉ=kçêíÜ=^ãÉêáÅ~W==NJUMMJOTUJ ●VVNP==ÜííéWLLïïïKéÜóíÉÅKÅçã=
- https://en.wikipedia.org/wiki/Demosaicing
If the microprocessor does not include debayering hardware, have to do the converting via software. For this you need additional processing power and the
framerate goes down. It is better to use the NEON coprocessor of the i.MX 8M Mini. For this support PHYTEC a special function.
It is present as GStreamer plugin "bayer2rgbneon" and in sources for use in an own C-program. We support a simple bilinear algorithm.
For use in GStreamer take "bayer2rgbneon" plugin. For more information to "bayer2rgbneon" parameters type:
- gst-inspect-1.0 bayer2rgbneon
The source are located at:
- https://git.phytec.de/bayer2rgb-neon/

Phytec phyCAM Specifications

General

Brand	Phytec
Model	phyCAM
Category	Control Unit
Language	English