PHYWE Cobra4 Wireless/USB-Link User Manual

1
www.phywe.com, © All rights reserved 12601-09 and 12601-10 / 4716
Operating instructions
Cobra4 Wireless/USB-Link
(Cobra4 Wireless/USB-Link incl. accessories)
12601-09
(12601-10)
PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
37079 Göttingen
Germany
Phone +49 (0) 551 604-0
Fax +49 (0) 551 604-107
E-mail info@phywe.de
Internet www.phywe.com
Fig. 1: Cobra4 Wireless/USB-Link
TABLE OF CONTENTS
1 SAFETY PRECAUTIONS
2 PURPOSE AND CHARACTERISTICS
3 FUNCTIONAL AND OPERATING ELEMENTS
3.1 Top side elements
3.2 Sensor interface
3.3 USB interface
3.4 Device charging
3.5 Battery replacement
4 NOTES ON OPERATION
5 HANDLING
5.1 Putting into operation
5.2 Starting the instrument into WiFi mode
5.3 Configuration
5.4 Reset the network settings
5.5 Starting the instrument into USB mode
6 TECHNICAL DATA
7 PARTS SUPPLIED
8 SOFTWARE
9 ACCESSORIES
10 WASTE DISPOSAL
11 LICENSE NOTICE
1 SAFETY PRECAUTIONS
 Carefully read these operating instructions completely
before operating this instrument. This is necessary to
avoid damage to it, as well as for user-safety.
 Only use the instrument for the purpose for which it was
designed.
 Only use the instrument in dry rooms in which there is no
risk of explosion.
 Protect Cobra4 Wireless/USB-Link from dust, moisture
and vapours. Use a slightly moist lint-free cloth to clean
the instrument. Do not use aggressive cleaning agents or
solvents.
 Only use the experimental set-up for the purpose for
which it is intended.
 Open the instrument for battery replacement, only.
 Before replacing the battery, disconnect the instrument
from other devices (e.g. PC, sensors).
 Pay attention to the correct polarity when replacing the
battery!
 The present-day state of software development makes it
impossible to guarantee that a product is free of faults.
PHYWE Systeme GmbH & Co. KG therefore does not
take on any liability for damages that occur during the
installation or the use of the instrument.
2 PURPOSE AND CHARACTERISTICS
Cobra4 Wireless/USB-Link enables wireless communication
between a PC, tablet or smartphone, and a connected Co-
bra4 Sensor-Unit.
Attention!

PHYWE Cobra4 Wireless/USB-Link Specifications

General

Brand	PHYWE
Model	Cobra4 Wireless/USB-Link
Category	Cell Phone
Language	English

Summary

Safety Precautions

Purpose and Characteristics

Functional and Operating Elements

Top Side Elements

Details on the top side elements for status, identification, and operation of the instrument.

Sensor Interface

Interface for connecting the instrument to a Cobra4 Sensor-Unit via a click connection.

USB Interface

Interface used for charging the device and connecting to a computer for data logging.

Device Charging

Information on charging the Li-ion battery via the USB interface.

Battery Replacement

Instructions and considerations for replacing the device's Li-ion battery.

Notes on Operation

Handling

Putting into Operation

Ensuring the battery is charged and using an end device with WiFi enabled.

Starting into WiFi Mode

Connecting a Sensor-Unit and switching on the device for WiFi operation.

Configuration

Procedure for changing the network mode of the Wireless/USB-Link.

Reset Network Settings

Procedure to reset the instrument to factory default settings ('Excursion' mode).

Starting into USB Mode

Procedure to set the device to USB mode by holding the record button during startup.

Technical Data

Parts Supplied

Software

Accessories

Waste Disposal

License Notice