Piaa Quad EDGE User Manual

-1-
PKI-0073
Quad EDGE
Installation Instructions
Please read the cautionary points before installation to ensure safe utilization of the product.
To user … Please keep this manual and a receipt with the name of the shop where
you bought it. When giving this product to a third party, always include
this manual together with the product.
To shop owners installing the product … After installation of the product, make sure the customer is provided
with this owner's manual.
●
The lamp becomes hot when turned on. When parking your car near  ammable items such as dried leaves, turn o the
lamp as it may cause a  re.
●
Do not look directly into the light for long periods. Doing so may cause eye irritation or visual impairment.
Thank you very much for purchasing PIAA product. Please read this instruction manual
thoroughly for proper use of the product. After completing your installation, keep this
manual for future reference.
●
The lamp and the switch harness are intended for motorized vehicle use only. Do not use for any other purpose.
●
This lamp is intended for use in rain (day or night), during foggy or snowy conditions where visibility is hampered.
Do not use during normal driving conditions.
●
Do not operate the switch while driving, unless local laws allow you to do so.
●
If the lamp is kept on when the engine is not running, it will drain the battery.
●
Make sure the lamp is installed securely before driving the vehicle. If a problem is found,  x it immediately.
●
Check for any loose screws that hold the lamp in place before driving. If you  nd any loose screws or bolts (if a bracket is
used), tighten them securely. If you notice a loose part while driving, inspect the section immediately and make the
necessary adjustments.
●
Avoid repeatedly turning the lamp o and on as it may reduce the overall life of the LED.
●
Some vehicles produce a high voltage electric charge when the engine is started. Avoid loading extra voltage to lamps by
turning the switch o when you start engine.
●
Avoid needless disassembly of the lamp or the switch harness as it may cause it to fail.
●
If the lamp and/or the switch harness is removed and set aside for safekeeping, wipe away all dust or grime and store in a
place free of moisture.
●
If the lens is cracked or damaged in any way, verify whether there is any damage to the harness. If there is any damage to
the cord covering, replace it immediately.
●
Avoid injury when replacing the harness and the switch Please dispose of it as a non-combustible item.
The
●
marks indicated in this manual are cautionary points related to the installation of the product.
To ensure safe and secure installation of the product, please follow these points closely.

Piaa Quad EDGE Specifications

General

Bulb Type	LED
Beam Pattern	Spot/Flood
Housing Material	Aluminum
Operating Voltage	12V
Color Temperature	6000K
Waterproof Rating	IP67
Lens Material	Polycarbonate

Summary

General Safety and Precautions

General Warnings and Cautions

Key warnings and cautions for safe installation and use of the PIAA Quad EDGE lamps.

Wiring Safety Precautions

Essential safety measures for electrical connections, preventing shorts, and potential fire hazards.

Product Details and Mounting

Product Components Checklist

Lists all parts included in the PIAA Quad EDGE lamp kit for verification.

Lamp Installation Guide

Instructions and precautions for physically mounting the lamps onto a vehicle.

Suspended Mounting Method

Procedure for disassembling and reassembling the lamp for suspended mounting.

Relay Harness Installation

Relay Harness Installation Sequence

Step-by-step guide for correctly installing the relay harness and switch.

Operational Adjustments and Troubleshooting

Driving Light Aiming

Guidelines for positioning the lamps to achieve optimal beam projection and avoid glare.

Lamp Activation Issues

Troubleshooting steps for when the lamp does not activate or switch illumination fails.

LED Failure Diagnosis

Steps to address situations where the LED suddenly fails to light up.

Fuse Replacement Procedures

Instructions for safely replacing fuses if a short circuit or failure occurs.

PIAA Limited Warranty Information

Repair and Replacement Process

Details on submitting PIAA products for warranty inspection and service.

Warranty Exclusions and Limitations

Conditions and damages not covered by the PIAA Limited Warranty.

Lens Crack Coverage Policy

Explanation of warranty coverage for lens cracks versus impact damage.

Exclusion of Damages

Limitations on PIAA's liability for consequential, incidental, or other damages.