-3-
PKI-0073
●
Verify all the parts are included. If a part is missing, please contact the place of purchase or PIAA directly.
●
Depending on mounting methods, some parts may not be used.
Product Details
Mounting Hardware
Four 6mm allen
head bolts
Two 10mm Socket
head bolts
Two Quad EDGE Lamps
Two 6mm Allen
Wrenches
●
Before connecting it to the battery, verify the wiring arrangement.
●
When connecting the battery terminal and or other electrical units, do not mistake the (-) and (+) terminals. Always start
with the (+) terminal.
●
After all wiring is complete, con rm that it works properly. If it fails to activate, refer to“8 Troubleshooting”section of this manual.
One Relay harness
Four 6mm
Lock Washer
Two Brackets
Two 10mm
Lock Nuts
To Next Page
Loading...
