40
English
1.10 Prevention of domestic fires
The product must be installed and used in compliance with the
manufacturer’s instructions and European and national standards
as well as local regulations.
when a flue pipe passes through a wall or a ceiling, special
installation methods must be applied (protection, thermal
insulation, distances from heat-sensitive materials, etc.)
See the paragraph “Connection to the flueway”
- It is also recommended that all elements made of combustible or
inflammable material, such as beams, wooden furniture,
curtaining, flammable liquids, etc. be kept outside the heat
radiation range of the stove and at a distance of at least 1m from
the heating block.
- For other information, see the paragraph “Safety distances” and
“Connection to the flueway”.
- The flue pipe, chimney stack, chimney and fresh air intake must
always be free of obstructions, clean and checked periodically,
that is, at least twice during the seasonal period from the lighting
of the stove and during its use. When the stove has not been used
for some time it is advisable to carry out the checks mentioned
above. For further information, consult a chimneysweep.
- Only use recommended fuels (See paragraph “Fuels”).
To Next Page
Loading...
