Page 1.4
VERY HIGH DENSITY MULTIPLEXER CARD 50-670A
pickering
SECTION 1 - TECHNICAL SPECIFICATION
Product Order Codes - Very High Density
Multiplexer
Channel
Selection
Model Variant Order Code
Single 198-Channel, 1-Pole 50-670A-022-198/1
Note: The above card can only select a single channel.
Channel
Selection
Model Variant Order Code
Single 10-Channel, 8-Pole 50-670A-021-10/8
Note: The above card is available to select a single channel.
Channel
Selection
Model Variant Order Code
Multiple
Multiple
Multiple
Multiple
Multiple
Multiple
Multiple
Multiple
Multiple
99-Channel, 1-Pole
49-Channel, 2-Pole
24-Channel, 4-Pole
5-Channel, 16-Pole
99-Channel, 2-Pole
49-Channel, 4-Pole
24-Channel, 8-Pole
10-Channel, 16-Pole
5-Channel, 32-Pole
50-670A-021-99/1
50-670A-021-49/2
50-670A-021-24/4
50-670A-021-5/16
50-670A-022-99/2
50-670A-022-49/4
50-670A-022-24/8
50-670A-022-10/16
50-670A-022-5/32
Note: Contact factory if the above modules are required in
single channel selection mode.
Product Customization
Pickering PCI cards are designed and manufactured on our
own flexible manufacturing lines, giving complete product
control and enabling simple customization to meet very
specific requirements.
Customization can include:
• Alternative reed relay types
• Mixture of reed relay types
• Alternative number of relays
• Different performance specifications
All customized products are given a unique part number, fully
documented and may be ordered at any time in the future.
Please contact your local sales office to discuss.
Support Products
eBIRST
Switching System Test Tool
This product is supported by the eBIRST test tools which
simplify the identification of failed relays, the required
eBIRST tools are below. For more information go to:
pickeringtest.com/ebirst
Product Test Tool Adaptor
50-670A 93-002-001 Not Required
Spare Relay Kits
Kits of replacement relays are available for the majority of
Pickering’s PCI switching products, simplifying servicing and
reducing down-time.
Product Relay Kit
50-670A-021
50-670A-022
91-100-003
91-100-008
For further assistance, please contact your local Pickering
sales office.
Mating Connectors & Cabling
For connection accessories for the 50-670A card range please
refer to the 90-002D 200-pin LFH Connector Accessories data
sheet where a complete list and documentation can be found
for accessories, or refer to the Connection Solutions catalog.
Operating/Storage Conditions
Operating Temperature:
Humidity:
Altitude:
0 °C to +55 °C
Up to 90 % non-condensing
5000 m
Storage Temperature:
Humidity:
Altitude:
-20 °C to +75 °C
Up to 90 % non-condensing
15000 m
Pickering can supply mating 200-pin connectors and
cable assemblies to enable easy integration of the
50-670A series of multiplexers
50-670A
pickeringtest.com
Page 4
Specifications & Ordering Information
To Next Page
