pico Technology PicoScope 2205A Programmer's Guide

API Functions36
Copyright © 2006–2016 Pico Technology Ltd. All rights reserved.ps2000pg.en r11
5.20
ps2000SetAdvTriggerChannelConditions
int16_t ps2000SetAdvTriggerChannelConditions
(
int16_t handle,
PS2000_TRIGGER_CONDITIONS *conditions,
int16_t nConditions
)
This function sets up trigger conditions on the scope's inputs. The trigger is defined by
a PS2000_TRIGGER_CONDITIONS structure.
Applicability
Available in block mode and fast streaming mode only
PicoScope 2202, 2204, 2204A, 2205 and 2205A only
Arguments
handle: the handle of the required oscilloscope
conditions: a pointer to a PS2000_TRIGGER_CONDITIONS
structure specifying the conditions that should be applied to the
current trigger channel. If NULL, triggering is switched off.
nConditions: should be set to 1 if conditions is non-null,
otherwise 0
Returns
0: if unsuccessful, or if one or more of the arguments are out of
range
non-zero: if successful

pico Technology PicoScope 2205A Specifications

General

Brand	pico Technology
Model	PicoScope 2205A
Category	Test Equipment
Language	English