PICO USB TC-08 User Manual

USB TC-08 Help
23
© 2005 Pico Technology Limited. All rights reserved.
USBTC08044-2
Reserved Pico error codes
Error code
Error
Further information
7
USBTC08_ERROR_NOT_RESPONDING
Cannot get a reply back
from a USB TC-08 unit.
8
USBTC08_ERROR_FW_FAIL
Unable to download
firmware.
9
USBTC08_ERROR_CONFIG_FAIL
Missing or corrupted
EEPROM.
10
USBTC08_ERROR_NOT_FOUND
Cannot find enumerated
device.
11
USBTC08_ERROR_THREAD_FAIL
A threading function failed.
12
USBTC08_ERROR_PIPE_INFO_FAIL
Can not get USB pipe
information.
13
USBTC08_ERROR_NOT_CALIBRATED
No calibration date was
found.
14
USBTC08_ERROR_PICOPP_TOO_OLD
An old picopp.sys driver
was found on the system.
Note: These reserved error code values are only meaningful to Pico technical support
staff, but they are supplied to allow developers to display warnings in their applications.
For more details on error codes, see
troubleshooting
.
Arguments:
handle
- Specifies the USB TC-08 unit.
Returns:
-1
- Invalid handle.
Error code
- See the error code information above for further
explanation.

PICO USB TC-08 Specifications

General

Brand	PICO
Model	USB TC-08
Category	Data Loggers
Language	English