Important Safety Information
• Exercise common sense while operating the Zymatic.
• Always use the keg cozy to shield the hot metal of the keg.
• Close supervision is needed when used around children.
• Allow machine to fully cool before removing or replacing
parts.
• Do not operate with a frayed cord or broken plug.
• Test the GFCI circuit breaker on the plug before every brew.
• Do not remove step filter from the Zymatic unless in pause
mode or brew cycle is completed.
• The step filter and contents may be hot when removing
from the machine.
• Do not immerse or soak the machine.
• Make sure all hoses are connected before starting a
brewing, rinsing or cleaning cycle.
• To avoid risk of electrical shock hazard do not disassemble
the Zymatic. There are no user serviceable parts inside.
• Various surfaces can get extremely hot during the brewing
cycle, use caution when handling the keg, hoses and
components.
• Do not remove the hose clamps, hot liquid spray may result.
• Do not remove the keg attachments while brewing.
© 2015 PicoBrew Inc. Zymatic® is a registered trademark and KegSmarts is a trademark
of PicoBrew, Inc. All other marks are property of their respective owners.
!
To Next Page
Loading...