SECTION 6: TROUBLE SHOOTING - CONTINUED
56 57
My display went black, but the Zymatic is still running.
‒ Check the back of your Zymatic and look at the fan
in the top center. If the Zymatic is on, the fan should
be running. If it is not running, your display was likely
overheated and shut off. Please contact PicoBrew
Product Support for further information.
My hops cage lids are too loose and keep popping off.
‒ If this happens to you, please contact PicoBrew
Product Support. Included with your kit are 4 orange
silicone bands that can be wrapped around a cage if a
lid is too loose.
If you have any problems, questions, or comments, contact
PicoBrew:
• Email: info@picobrew.com
• Submit a Support Request Ticket: http://www.
picobrew.com
• Support Forums: http://picobrew.com/forum
To Next Page
Loading...