The optimized multiple burial search is based on a separation of signals via the digital
signal processor (DSP).
MULTIPLE BURIALS
Number of
possible marks:
If there are multiple burials, this is clearly indicated by the number of matchstick men.
By default, the PIEPS DSP PRO/DSP SPORT will automatically search for the strongest signal.
Once the position of the rst burial has been located (see ne search), press the button
MARK without moving away from this point. This signal is now suppressed. Once a signal
has been successfully suppressed, an outline appears around the matchstick man.
The PIEPS DSP PRO/DSP SPORT will automatically search for the next strongest signal.
Now continue the search as described above, and repeat the procedures until all
transmitters are located. If there are no further signals within the receiving range the
display indicates “No Signal”.
(1)
(2)
(3)
(4)
(5)
max. 5 transmitters,
3 are indicated on
the display
To Next Page
Loading...
