EasyManuals Logo

Pierce Mid-Mount Ascendant Aerial Tower User Manual

Pierce Mid-Mount Ascendant Aerial Tower
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
SAFETY
1-28 / Mid-Mount Ascendant Aerial Tower
© 2021 Pierce Manufacturing Inc. All Rights Reserved.
1-12.5 Control of Hazardous Energy (Lockout/Tagout)
Certain features on this vehicle may require lockout or tagout (LOTO) prior to maintaining or servicing. Each
employer should consider the manner in which they will be using this vehicle and its associated equipment, identify
potential hazards, and then require LOTO procedures as necessary.
LOTO refers to specific practices and procedures to safeguard employees from the unexpected energizing or
startup of machinery and equipment, or the release of hazardous energy during service or maintenance activities.
OSHA lockout/tagout standard 29 CFR 1910.147 applies to the control of energy during servicing and/or
maintenance of machines and equipment. This standard requires employers to establish a program and utilize
procedures for affixing appropriate lockout devices and tagout devices, and to otherwise disable machines or
equipment to prevent unexpected energizing, start-up or release of stored energy in order to prevent injury to
employees.
LOTO procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to
be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to,
the following:
A specific statement of the intended use of the procedure;
Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control
hazardous energy;
Specific procedural steps for the placement, removal and transfer of lockout devices or tagout devices and the
responsibility for them
Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout
devices, tagout devices, and other energy control measures.
Stored Energy or Start-Up Hazard.
Follow OSHA lockout/tagout standard 29 CFR 1910.147 before:
Maintaining or servicing
Working in, on, under or around vehicle or equipment
Failure to comply may result in serious injury or death.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pierce Mid-Mount Ascendant Aerial Tower and is the answer not in the manual?

Pierce Mid-Mount Ascendant Aerial Tower Specifications

General IconGeneral
BrandPierce
ModelMid-Mount Ascendant Aerial Tower
CategoryControl Panel
LanguageEnglish