Need help?Do you have a question about the Pierce Pumper and is the answer not in the manual?
Defines qualified operators and required training for the Pierce pumper.
Advises operators to seek clarification on any uncertain functions to ensure safety.
Outlines operator duties for system understanding, control adjustment, and safe operation.
Introduces safety signals (DANGER, WARNING, CAUTION) and their meanings.
Provides instructions for reporting potential design defects or manual inconsistencies.
Explains the importance of a pump chart for determining discharge pressure for various hose configurations.
Details how to check and adjust the intake relief valve, a crucial safety component.
Provides safety guidelines for safely mounting and dismounting the apparatus.
Emphasizes securing hoses to prevent deployment during vehicle movement.
Explains the procedure for engaging the driveline-driven pump, including safety precautions.
Covers the engagement and operation of Power Take-Off (PTO) driven pumps.
Explains how to supply water to the pump from various sources.
Provides instructions on operating discharge and drain/bleeder valves.
Guides on operating the pump from an open water source like a pond or lake.
Explains how engine speed and governors control pump pressure.
Guides on monitoring intake pressure and avoiding pump cavitation.
Explains how to interpret engine status displays and warning lights.
Details the operation of two-stage pumps, including mode selection.
Outlines procedures for shutting off water flow and disengaging the pump.
Emphasizes annual testing of pumping apparatus according to NFPA standards.
Guides on developing maintenance schedules and referencing service manuals.
Provides detailed instructions on draining the pump system to prevent freezing damage.
Explains the procedure for flushing drain valves to maintain proper operation.
Advises on proper methods for storing the pump to prevent damage.
To Next Page
General