10
Customer support team: +44 (0) 333 220 6054
Filling the Water Tank:
To fill up the water tank, first remove it from
the back of the unit. To do this, place your
fingers over the groove on the underside
of the tank drawer and press the release
catch down using your thumb. Once the
catch is loose, pull the tank drawer out of its
compartment.
You can now fill the water tank and ice box.
Cleaning and Care:
Cleaning the Unit:
To clean the unit’s housing, wipe it down with
a soft, damp cloth and a mild detergent.
Never use aggressive chemicals, gasoline,
detergents, chemically treated cloths or other
cleaning solutions to clean the unit, as this
may cause damage to its components.
Take care to thoroughly dry the unit before
using it again.
Note:
Always unplug the unit from the mains
before cleaning.
Clean the unit regularly to ensure optimal
performance.
WARNING!
Do not allow water or any other liquid
into the motor housing or any of the inner
components, as this could cause damage
to the unit.
Note:
When filling up the tank, take care to
ensure the water level is between the
MIN and MAX lines. You can gauge the
water level at any time using the water
window at the front of the appliance.
Take care to ensure the water tank
is filled when attempting to use the
humidifying function. If this function is
selected while the water tank is empty,
the corresponding indicator will flash and
you will hear an alarm sound, Should this
happen, fill the water tank immediately
or refrain from using the humidifying
function.
To Next Page
Loading...
Need help?
General
