7
Assembling The Fan Base:
1. To assemble the fan base, begin by
turning your fan upside down.
2. Place each of the two halves of the base
to either side of the power cord holder,
taking care to ensure they are correctly
lined up, and that the power cord does
not become trapped between them.
3. Once both halves of the base have been
correctly placed, lock them together by
sliding each of the slots on one side of
the base into their corresponding holes
on the other side until they click into
place.
4. When the two halves have been
connected, thread the power cord
through the two power cord hooks until
it is firmly secured into place.
5. Once the steps above have been
followed, place the two wingnut screws
into each of the two holes at the centre
of the fan base and twist them clockwise
to tighten.
6. When all of the above assembly steps
have been carried out, turn the fan back
upright.
7. The fan is now ready for normal use.
To Next Page
Loading...
Need help?
General
