pigtronix INFINITY 3 - Remote Switch Functions: Redo, Reverse, Varispeed Control; Redo, Instant Erase, and Reverse Playback; Varispeed Control via Remote Switch

22
Once an overdub has been closed and then undone, it can be put back instantly by pressing the Undo
remote switch once again. You can Undo and Redo an overdub as many times as desired.
Once you have started the base layer recording, simply press the Undo switch to close your initial
loop and go straight into playback with overdub active. Press the appropriate Loop footswitch as you
normally would to close the overdub when desired and begin regular playback.
When one or both loops are stopped, hitting Undo will trigger an instant erase of the currently armed
loop. This lets you simply leave the unit in ALL mode and retain the option to clear individual loops
by pressing the Undo switch aer the desired loop has been stopped.
Reverse is triggered by shorting the tip to the sleeve of the Undo jack. This is accomplished by
connecting a 2 or 3 button momentary footswitch (such as the Pigtronix Universal Remote) to the
Undo jack with a TRS cable.
Pressing the Reverse button triggers reverse playback at the beginning of the next loop cycle
according to the ARM / ALL setting. Pressing Reverse while recording will instantly trigger reverse
playback once the Loop is closed.
Pressing Reverse while playing a reversed Loop will revert it to its normal play direction aer the
next loop cycle.
Once you are in reverse playback, you can use the Undo switch to flip flop between forwards and
reverse versions of the same layer instantly.
Hitting Reverse and then Undo before the end of the loop cycle will cancel the Reverse command.
This mode remaps the functionality of the Reverse and Undo switches to control the pitch of recorded
material. To access the Varispeed Remote Control, press and hold the Reverse switch for 2 seconds.
While in this mode, the STEREO / SPLIT button will turn Orange. To exit Varispeed Remote Control,
press and hold the Reverse switch for 2 seconds.
A short press of Reverse decreases the pitch and increases the length of both loops by the interval
selected using the Varispeed Interval Remote Menu.
Redo
Rec > Overdub > Play
Instant Erase
Reverse
Varispeed Remote Control