Need help?Do you have a question about the pigtronix INFINITY 3 and is the answer not in the manual?
General| Type | Looper |
|---|---|
| Number of Loops | 2 |
| Audio Quality | 24-bit / 48kHz |
| MIDI | Yes |
| USB | Yes |
| Stereo | Yes |
| Undo/Redo | Yes |
| Reverse Playback | Yes |
| Half-Speed Playback | Yes |
| Power Supply | DC 9V |
| Inputs | 2 x 1/4" (TS) |
| Outputs | 2 x 1/4" (TS) |
Identifies and illustrates the main controls and connection points of the pedal.
Details arming, recording, playback, overdubbing, and stopping loops with footswitches.
Explains the color coding and behavior of the pedal's LED indicators.
Explains the numeric display and primary audio/power jacks.
Covers remaining jacks for audio, remote, MIDI, and USB connectivity.
Describes enabling/disabling sync, setting multiplier ratios, and loop synchronization.
Explains choosing between series/parallel playback and stereo/split audio input.
Describes controlling loop playback and erase operations across all or armed loops.
Explains stop modes, fade-out, and sample rate adjustments.
Explains how to arm loops, the order of recording, and starting playback.
Describes how to play back recorded loops and stop playback.
Details jump recording, erasing loops, and advanced stop functionality.
Explains synchronization, series modes, and cue/fade behavior.
Details overdubbing additional material to existing loops.
Covers isolating loops to channels and loading/saving presets.
Details the process for saving new presets and copying them between banks.
Explains how to erase saved audio from presets.
Describes how to activate and control loop decay and feedback effects.
Explains changing pitch and speed of looped audio via sample rate.
A table showing playback sample rate effects based on recording sample rate.
Details pitch and speed changes based on semi-tones and intervals.
Lists functions activated by holding switches during power-up.
Explains specific boot options like Auto Zero Record, Mono Mixdown, Stutter, and Overdub Syncs.
Explains how to use the Undo function with a remote switch.
Describes the process and caution for reformatting the microSD card.
Details redoing, instant erasure, and reverse playback using remote switches.
Explains controlling Varispeed pitch and length with remote switches.
Details how Varispeed intervals are displayed and their scale degree meanings.
Introduces connecting an expression pedal for parameter control.
Explains assigning the expression pedal to control Volume, Aging, or Varispeed.
Details how the Infinity 3 synchronizes with external MIDI Beat Clocks.
Explains how MIDI clock affects tempo, sample rate, and quantization.
Details how Record, Play, Stop, and Overdub commands sync with MIDI.
Covers MIDI channel selection and ignoring MIDI clock/notes.
Explains MIDI mapping and the four types of command control.
Describes how MIDI messages trigger actions for specific loops.
Explains how MIDI values simulate switch presses (short/long).
Lists MIDI CC numbers mapped to functions like Varispeed and Volume.
Covers MIDI functions controlled by switch or trigger actions.
Instructs on downloading firmware and the step-by-step update procedure.
Provides a table of maximum recording times for Loop 1 based on presets and multiplier.
Offers a formula for calculating loop times and notes on SD card size.
Details warranty period, coverage, and the requirement for product registration.
Lists conditions and product issues that are not covered by the warranty.
States that Pigtronix makes no other express warranties beyond the limited one.
Provides instructions on how to register and file a warranty claim.
Provides the address, phone number, email, website, and social media links.
A message regarding digital manual distribution to reduce paper waste.
To Next Page
