pigtronix INFINITY 3 - Boot Options and Global Settings; Switch-Based Boot Options Overview

19
Each of the footswitches and toggle switches can be pressed during power up to enable and disable
a specialty global setting on the Infinity 3. These settings are sticky and will remain set even aer
removing power from the pedal.
Boot Options
Switch Boot Option
LOOP  Auto Zero Record
LOOP  Mono Mixdown
STOP Stutter Mode
SYNC / MULTI Overdub Syncs to Loop Boundary
SERIES / PARALLEL Ignore all MIDI Data Except Clock
STEREO SPLIT Ignore MIDI Notes
ARM / ALL Ignore MIDI Clock
CUE / FADE MIDI Channel Select
SAMPLE RATE Click Killer on/off
SAMPLE RATE + CUE/
FADE
Load Firmware Update
ARM / ALL +
STEREO SPLIT
Reformat SD Card
SERIES / PARALLEL +
SYNC / MULTI
Colorblind Mode