15
When recording an overdub, the overdub will not save until it is closed and a loop boundary has
been passed. As a result, when CUE / FADE is turned off in Series mode, switching loops right aer
recording an overdub will result in the overdub not being present when you switch back to the other
loop. However, Cue and Fade automatically close the recording at the end of the loop cycle—this
ensures that the Overdub you just recorded gets saved. For this reason, it’s best to always use Series
mode with the Cue or Fade setting. You can always accomplish an instant stop, by double pressing
the Stop switch.
The Input Split function is intended for isolating Loop 1 to audio channel 1 and Loop 2 to audio channel
2. This is helpful if you want to loop multiple instruments on isolated, yet synchronized loops.
When nothing is plugged into Input 2, then the audio from Input 1 becomes the source for Input 2
(as well as Input 1) and the Input Split function allows you to record separate loops for the le and
right output channels.
The Infinity 3 allows you to store and recall up to 50 presets, which consist of audio that you’ve
either recorded directly into the pedal, or audio you’ve loaded onto the pedal from your computer
using the app. Each preset includes a Loop 1, as well as a Loop 2 if you’ve recorded a second loop.
The 50 presets are organized into five banks of 10.
To Load a preset, simply turn the Preset knob until you arrive at the desired preset, then press the
knob to select. The Multi-Segment Digit displays the preset number.
To cancel the load process at any time, hit the Stop footswitch, or simply turn the preset knob to
return to the currently loaded preset.
Series Overdub
Input Split
Presets
Loading
To Next Page
Loading...
