pigtronix INFINITY 3 - MIDI CC;Note Message Control Types; Loop-Assignable MIDI Commands; Switch-Type MIDI Commands

27
Specific values of these MIDI CC/Note messages trigger the action for Loop 1 Only (0), Loop 2 Only
(1), the currently Armed Loop Only (2), or Both Loops (3).
The value of these MIDI CC/Note messages determines whether the message acts like a switch press
or delivers a specific type (short or long) of switch press.
A value of 0 is not pressed, a value of 127 is pressed. For MIDI controllers that send 127 when
pressed and 0 otherwise, this type of command lets the MIDI footswitch act like the buttons (hold for
2 seconds for a long press, or less for a short press).
Values of 1 or 2 specifically send a short press and long press respectively and act immediately.
Loop-Assignable
Switch